Single Channel - ED3171 Series
Overview
Alternative long-distance Ethernet solution to reduce infrastructure cost and shorten the project schedule by using existing copper wires
Supports Web, CLI, SNMP and hardware watchdog
Features
- Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
- Operates transparent to higher layer protocols such as TCP/IP
- Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
- Ethernet Extender (RJ-11 and Terminal Block) Port: Symmetrical on the VDSL, High-speed Full-duplex 50Mbps communications link over existing copper telephone wire
- Supports DIP switch to select Local or Remote side
- Supports DIN-Rail Panel Rack Mounting installation
- Ten speeds with speed indicator LEDs on front panel of unit; Up to 50Mbps @ about 300meters (984ft.), 1Mbps @ about 1,900meters (6,232ft.)
- Supports external Hardware Watch Dog
- Supports Web, CLI, SNMP management Interface Link Status (for VDSL, Ethernet), Get/Set IP, Get Rate, Set Rate (for CO site), Get Counter, Get SNR (Local, Remote), SNMP setting (Community),
- System setting, Reset to Default, F/W upgrade through the management Interface
- Redundant power inputs with Terminal Block and DC Jack
- -40°C to 75°C (-40°F to 167°F) operating temperature range
- Hardened aluminum case
Technology
Standards
- IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3x, Ethernet over VDSL
Protocols
- Transparent to higher layer protocols
Processing Type
- Half-duplex back-pressure and IEEE802.3x Full-duplex flow control
Power
Input
- Input Voltage:
- 12 to 32VDC (Terminal Block);12VDC (DC Jack)
Power Consumption
- 5.76W Max. 0.48A@12VDC, 0.24A@24VDC
Overload Current Protection
- Present
Reverse Polarity Protection
- Present
Mechanical
Casing
- Aluminum case
- IP30
Dimensions
- 50mm (W) x 110mm (D) x 135mm (H)
- (1.97" (W) x 4.33" (D) x 5.31" (H))
Weight
- 0.8Kg (1.76lbs.)
Installation
- DIN-Rail (Top hat type 35mm), Panel Rack Mounting
Interface
Ethernet Port
- Port: One RJ-45 port, 10/100BASE-TX Full/Half-duplex;Auto-Negotiation, Auto-MDI/MDIX
- Speed: 10/100Mbps
- Distance: 100meters (328ft.)
- Cable: 10BASE-T: UTP CAT. 3, 4, 5 (2-pair wire)
- 100BASE-TX: UTP CAT. 5 (2-pair wire)
Ethernet Extender Port:
- Port: One RJ-11 and Terminal Block port
- Speed: 1/3/5/10/15/20/25/30/40/50Mbps
- Distance: 1900meters (6,232ft.)
- Cable: Telephone line 24 AWG (0.5mm diameter, 1-pair wire) or larger
Console Port:
- Port: One DB9 RS-232 port
DIP switch:
- One DIP switch: Local (CO) or Remote (CPE)
LED Indicators
- Per Unit: Power Status (Power)
- Per Port: 10/100TX: Link/Activity, Full-duplex
- Line: Error, Link, Local, Remote
1.
LED: Green; Speed: 1Mbps; Distance: 1,900m(6,232ft.)
LED: Amber; Speed: 3Mbps; Distance: 1,800m(5,904ft.)
2.
LED: Green; Speed: 5Mbps; Distance: 1,600m(5,294ft.)
LED: Amber; Speed: 10Mbps; Distance: 1,400m(4,593ft.)
3.
LED: Green; Speed: 15Mbps; Distance: 1,200m(3,936ft.)
LED: Amber; Speed: 20Mbps; Distance: 1,000m(3,280ft.)
4.
LED: Green; Speed: 25Mbps; Distance: 800m(2,624ft.)
LED: Amber; Speed: 30Mbps; Distance: 700m(2,296ft.)
5.
LED: Green; Speed: 40Mbps; Distance: 600m(1,968ft.)
LED: Amber; Speed: 50Mbps; Distance: 300m(984ft.)
NOTE All speed selections are Symmetrical on the DSL and Fullduplex on the Ethernet
Environment
Operating Temperature
- -40°C to 75°C (-40°F to 167°F)
- Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature
- -40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity
- 5% to 95% (non-condensing)
Regulatory Approvals
ISO
- Manufactured in an ISO9001 facility
Safety
- UL508
EMI
- FCC Part 15, Class A
- EN61000-6-4
- EN55022
- EN61000-3-2
- EN61000-3-3
EMS:
- EN61000-6-2
- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria B
Air: + / - 8KV; Criteria B - EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 3000MHz; 80% AM Criteria A - EN61000-4-4 (Burst Standards)
Signal Ports: + / - 4KV; Criteria B
D.C. Power Ports: + / - 4KV; Criteria B - EN61000-4-5 (Surge Standards)
Signal Ports: + / - 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B - EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A - EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance:
- IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10~150Hz, Amplitude 0.35mm (Operation/Storage/Transport) - IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) - IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)
Ordering info
ED3171-00Z 10/100BASE-TX Hardened Managed Ethernet Extender
Power Input Interface:
(Z) =B : Terminal Block & DC Jack
Power Supply: (Optional)
*Option A - The Terminal Block type external power supply are not included. Please order the following part numbers, as required:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
**Option B - The external power adapter and power cord are not included. Please order the following part numbers, as required:
41-136044-X X=1,2,3,4,5
Installation Type :
Optional Panel mount kit, part number:
KP-AA96-480
Oferta
- Patchcordy i Pigtaile światłowodowe
- Kable prefabrykowane
- Przełącznice światłowodowe
- Elementy pasywne
- Systemy zwielokrotnienia falowego
- Szafy i obudowy teleinformatyczne
- Mufy światłowodowe
- Osprzęt liniowy
- Narzędzia instalacyjne
- Kable światłowodowe
- Osprzęt i narzędzia do budowy linii
- Elementy aktywne
- Listwy i kolumny zasilające
