Single Channel - EL9100
Overview
Harsh environment design and supports auto 10/100/1000BASE-T Ethernet transmission
DIP switch design for Link-Fault-Pass-Through, fiber auto/ force mode, link down alarm configuration
Features
- Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
- DIP switch configuration for "Link-Fault-Pass-Through", fiber auto/force mode, link down alarm
- 10/100/1000Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- Alarms for power and port link failure by relay output
- Redundant power inputs with Terminal Block and DC Jack
- -40°C to 75°C (-40°F to 167°F) operating temperature range
- Hardened aluminum case
- Supports DIN-Rail, Panel or Rack Mounting installation
Technology
Standards
- IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T, IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x
Forward and Filtering Rate
- 1,488,100pps for 1000Mbps
Power
Input
- Voltage: 12 to 48VDC (Terminal Block);
- 12VDC (DC Jack)
Power Consumption
- 7.68W Max, 0.16A @ 48VDC
Overload Current Protection
- Present
Reverse Polarity Protection
- Present
Mechanical
Casing
- Aluminum case
- IP30
Dimensions
- 50mm (W) x 110mm (D) x 135mm (H)
- (1.97" (W) x 4.33" (D) x 5.31" (H))
Weight
- 0.8Kg (1.76lbs.)
Installation
- DIN-Rail (Top hat type 35mm), Panel, Rack Mounting
Interface
Ethernet Port
- 10/100/1000BASE-TX: 1 port
- 1000BASE-SX/LX/BX: 1 port
LED Indicators
- Per Unit: Power Status (Power1, Power2, Power3, Fault), LFPT
- Per Port: 10/100/1000TX: Link/Activity, Speed, Full-duplex/Collision
- 1000SX/LX/BX: Link/Activity
Relay Contact
- Relay contact rating with current 1A @ 30VDC,
- 0.5A @ 120VAC
Environment
Operating Temperature
- -40°C to 75°C (-40°F to 167°F)
- Tested @ -40°C to 85°C (-40°F to 185°F))
StorageTemperature
- -40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity
- 5% to 95% (non-condensing)
Regulatory Approvals
ISO
- Manufactured in an ISO9001 facility
Safety
- UL508
EMI
- FCC Part 15, Class A
- EN61000-6-4
- EN55022
- EN61000-3-2
- EN61000-3-3
EMS
- EN61000-6-2
- EN61000-4-2 (ESD Standards)Contact:
+ / - 4KV; Criteria BAir: + / - 8KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 2.7GHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)
Signal Ports: + / - 4KV; Criteria B
D.C. Power Ports: + / - 4KV; Criteria B
- EN61000-4-5 (Surge Standards)
Signal Ports: + / - 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
- EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
- EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A
Environmental
Test Compliance
- IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage Transport) - IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) - IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)
Ordering info
EL9100-X1B 10/100/1000BASE-TX to 1000BASE-SX/LX/BX Hardened Media Converter
Gigabit Options
(X) =
3 : 1000BASE-SX (SC) - 550m
4 : 1000BASE-SX (SC) - 2Km (1310)
5 : 1000BASE-SX (ST) - 550m
A : 1000BASE-LX (SC) - 10Km
B : 1000BASE-LX (SC) - 20Km
H : 1000BASE-LX (ST) - 10Km
I : 1000BASE-LX (ST) - 20Km
R : 1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm - 20Km
S : 1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm - 20Km
Power Supply : (Optional)
*Option A - The Terminal Block type external power supplyies are not included. Please order the following part numbers:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X
(X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
**Option B - The external power adapter and power cord are not included. Please order the following part numbers:
41-136044-X
(X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
Installation Type :
DIN-Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480